Articles about Zippo

Aluminum Zippo: unsuccessful experiments and collectible rarities

Thursday, April 15th, 2010

Zippo Vintage aluminum are extremely rare instances. All lighters, which will be discussed in this review, are test prototypes. The existence of Zippo aluminum go into series production, no data. The reason is that aluminum - a metal with a low melting point. This causes loose loops from the heating flame lighters. The company attempted to develop stronger hinges, but, apparently, testing and has not brought positive results. After some time, the company began to produce models of Zippo just with aluminum coating, or so-called "anodized" Zippo.

Before you prototype aluminum Zippo 1956. The body and hinges are made of aluminum. On the lighter body has a logo of the company Alcoa - Aluminum Company of America .

The prototype aluminum Zippo Slim 1957. Hinges of this sample is made of brass with special fasteners to the bottom of the housing and the lid of the lighter. This was done in order to improve the resistance to high temperature during the combustion of the lighter.

An interesting fact is that at the bottom of the Zippo present marking 10 K GF, which in theory always refers to gold-plated Zippo . Apparently, it was the cost of production test batch - took the first punch, which caught while different from the usual series.

Well, another prototype aluminum Zippo Slim 1957 with the image of the ship on one side and on the other a kind of decor. As with the previous model, the loop just made of brass with special fasteners for the upper and lower parts of the lighter body.

In the 1990s, the company had issued Zippo Aluminum cans of gasoline, so you can carry them with you. If not at hand will be the usual fuel cans, you could always fill his lighter on the spot. Cans were small and large sizes. Perhaps now it is one of the only modern Accesories Zippo, made of aluminum.

The detailed article about Zippo gasoline canister read here . Thank you very much to our colleague Yuri Vorobyov (botas) for an excellent review!

Company Zippo and failed to start production of aluminum lighters, and who knows what might have been the situation if you do it's still possible. The company would lose its status as the manufacturer of high-quality and reliable lighters? Would Zippo manufacturer of cheap and low-priced models? Not at all. Aluminum Zippo originally conceived as a rare instances lighters, primarily intended as promotional samples for different aluminum companies. At that time it was a novelty, well, or, at least, unusual. But time dictates the trend today looks like a few copies of the test is cheap and not solid. Besides, Zippo from the very first day of its existence, has set itself the highest level of quality products and the materials used, and exchanged for a more simple materials simply did not. This did not prevent, however, dozens of competitors Zippo back in the 1940s to produce very high-quality and reliable lighters made of aluminum and aluminum alloys, and among them were such well-known brands such as Park Sherman, Berkeley, Matawan, and even Duhnill and ST Dupont released during the Second World lighter aluminum.

I'll tell you a little curiosity. In mid-2009 on Ebay went on sale a few instances of "modern experimental Zippo aluminum." They even had a stamp, and a description of the lots to say that test is very rare, and the party of the present aluminum Zippo!

What was it really so it was not possible to find out. Worried brotherhood collectors immediately seek an official explanation in the company itself, where a response was received that any model of aluminum have never gone into serial production and are fakes. This, however, did not stop enterprising seller within a couple of weeks to push very gullible buyers several instances not clear that under the guise of a modern aluminum prototype Zippo for a price higher than $ 200-300 (per copy!). Talented scam definitely a success, although it was done clumsily. But more than any trace of modern "aluminum Zippo" never met.

Finally, the theme of the aluminum would like to quote the words of leading analyst of Mobile Research Group, chief editor of the site www.mobile-review.com Eldar Murtazin:

"Allow me to recall an anecdote as aluminum worth at the beginning of the last century. In the absence of this metal smelting technology it was incredibly expensive. Aluminum Gramm worth twice grams of gold. British scientists for the recognition of Mendeleev gave him chemical balance. One bowl was cast from pure gold, and the second ... aluminum. Today, technology is such that aluminum is not perceived as something special, many in the kitchen will be found a few pieces of this metal. "

This article was written based on materials from the site www.zippogallery.com

Scrimshaw Zippo: small carved masterpieces

Tuesday, April 13th, 2010

As I promised, today we'll talk about in a series of Zippo Scrimshaw. This topic is quite exciting and unusual. In English "Scrimshaw" means - carving on shells, carved on ivory . On the surface of specially coated Zippo lighters thin plates of ivory. Then on these plates was done carving depicting various miniatures, as a rule, there were various marine motifs (ships, sea, lighthouses, etc.).

Ivory - a general concept of the precious material used to make jewelry, handicrafts, statues and various luxury items. Of course, as a rule, ivory - is the tusks of elephants. But the trend is that the term "ivory" (eng. Ivory) today involve not only the tusks of elephants, but also the tusks, walrus, hippopotamus teeth, bone whale, whale tooth. There is also the so-called vegetable ivory - Tagua. Its properties - strength and color - match those of natural ivory. However, Tagua - a tropical palm tree that grows in the forests of the Amazon. A jewelry used its seeds.

All these materials are a bit similar in their properties and appearance, so the ordinary person, not an expert, to identify the material from which it is made or that the product, at times hardly possible.

Accordingly, if you say that the product is made of ivory - is not necessarily the elephant tusks, but, for example, the whale bone.

In 1976-77 the company has developed a test model of Zippo lighters to the surface of ivory. There were three: Outrigger, Schooner, Whaler.

Before you Outrigger prototype Zippo (Zippo Outrigger), with overlays of real ivory. The reverse side also made of bone, but the image on it was not.

Outrigger - this extra support, increase the stability against tipping over the boat.

Zippo Schooner (Zippo Schooner) in 1977 as well with plates of real ivory:

Today on Ebay meet Zippo with overlays of tarsus (bone cattle). She does not have the advantages of "noble" bones, and its main advantage - the availability, both in quantity and price. Bobbin well polished, quite malleable. The lack of it - in the ability to quickly turn yellow, so products need to whiten your bobbin. This is the basic material of which are currently created art works.

Zippo with overlays of the tarsus are not officially released models Zippo is a self-made masters handmade bone carvers, who, however, has its admirers and fans.

However, it is necessary to distinguish the three aforementioned prototype from conventional production models Scrimshaw. At the very beginning of his "experiment" Zippo company came to the conclusion that the use of this ivory lighter - a very expensive process, and in 1982 introduced a model with Scrimshaw plates made of acrylic. It is from this material produced today lining for Zippo Scrimshaw.

Also the subject of this series are not only lighter, but also Zippo pocket knives. Their arms also coated with various thumbnail images.

The estimated price for these models, as a rule, not much different from the price of conventional production models Zippo - 25-40 dollars in the US, but can reach up to 1-00-250 dollars for some rare species.

Historically, it is the image on the marine theme appear more often on Zippo scrimshaw, but collectors know many other varieties of carved figures on lighters, mainly from the world of fauna:

But, as mentioned earlier, is to be distinguished from the serial models vysheupomyanutymyh three prototypes. Zippo with overlays of this ivory are extremely rare, and their trading price can reach up to 1500-2000 dollars.

This article was written using the site materials www.zippogallery.com

The history of relations Woody Woodpecker now Zippo

Tuesday, March 30th, 2010

Surely many famous cartoon studio of the famous Walter Lanz about woodpecker Woody (Woody Woodpecker) with its original characteristic laugh: "Ha-ha-ha-HAA-ha!". The story of Woody is very interesting and noteworthy. For the first time, this eccentric cartoon character appeared in 1940. in one of the cartoon series about Andy Panda, called "Knock Knock".

But Lanz so pleased with this brash and brazen woodpecker, it was decided to bring it to a separate series, where Woody was to play a major role. Since its first appearance in the series about Andy Panda, the image of the famous woodpecker with the passage of time gradually began to change and evolve.

Woody first appeared on screen in 1957 in a show called The Woody Woodpecker Show, which broadcasts American Broadcasting Company (ABC) - US television network, which owns one of the three most popular US television. Sponsor of the American company performed Kellogg's , a well-known manufacturer of breakfast cereals and fast food preparation.

Each episode consisted of three theatrical cartoon about Woody, and ran a cartoon character during the show itself, Walter Lantz.

The show lasted until 1972, did not close until Lantz studio. But in the late 1990s, the idea of showing the movie about Woody again become relevant in a show called The New Woody Woodpecker Show. This show was an updated version of the once popular show Lanza The Woody Woodpecker Show, and was broadcast by US company Fox Broadcasting Company (often referred to simply as the Fox). In Woody Woodpecker also has a star on the Hollywood Walk of Fame for his contribution to the film industry. As we know, on the sidewalk of Hollywood Boulevard and Vine Street in Hollywood, invested more than 2,600 five-pointed stars with the names of celebrities, vnёsshimi, according to the Hollywood Chamber of Commerce, a major contribution to the entertainment industry. So among these stars have an asterisk and Woody. In 1988, Woody also managed to shine in the famous art comedy film "Who Framed Roger Rabbit."

The history of relations Woody Woodpecker and his creator Walter Lantz now Zippo as interesting and controversial. Somehow Lantz wanted to promote the popularity of the character on Zippo lighters. In response, the company Zippo lighters produced two samples for further approval Lanz. Apparently not entirely satisfied with the design sample, the creator of Woody wanted to have his name was engraved on the bottom of Zippo lighters. But here in the Zippo from doing so refused, remembering the principle of integrity and inviolability laid their founder George Bleysdellom: "Build your product with integrity, stand behind it 100%, and success will follow ..." («Make your product on the conscience, defend it at 100, and success will come to you "). Donate even for such an order the traditional stamp on the bottom was not in the rules of the company.

As a result, one unnamed Japanese company has decided to implement what had once wanted to see Mr. Lantz. They have created an exact copy of the prototype lighters, Zippo that made for the creator of Woody, but already realized intent to Lanza. At the bottom of the lighter was engraved his name. An interesting fact is that the original prototype Zippo with Woody, initials Lanza «WL» (Walter Lantz) were engraved under the feet of Woody, that apparently proved unnecessary in the Japanese copies.

This Zippo 1952-53. It is one of the test models manufactured for Walter Lantz:

This Japanese Zippopodobnaya lighter. As you can see, the design is fairly closely follows the design of the original American Zippo. At the bottom of the lighter - the name of the creator Walter Lantz Woody and the inscription Japan (Japan). In fact, these items are not original Zippo lighters, despite the complete coincidence of the external shape with US counterparts. But you can not call them fakes. They did not mention a word about the company Zippo. In this regard, it was very original and unique in its kind lighters that implement the desired intent of Walter Lantz, the creator of the cartoon about Woody Woodpecker. These Japanese lighters are highly valued by collectors.

This article was prepared by using the site materials www.Zippogallery.com

Housing material Zippo, coverage options and methods of applying decor

Thursday, March 11th, 2010

Many of us have always been interested and interested in the question regarding the coverage Zippo lighters, and methods of applying decor in their body. The theme, in fact, interesting and entertaining, so our portal ZippoCollector.ru decided to make a small "guide" on this issue.

Generally coating Zippo lighters always struck my imagination, so it is a vast subject. Of course, finding a precise description of the Internet is impossible in principle, it is easier to go to Bradford and employees ask around the plant for the production of Zippo! Therefore, on the theme of the material from which made Zippo can only speak with respect, to speculate and pushing the various hypotheses. Similarly, it is impossible to cover each coating individually. We all understand how many Zippo lighters produced since 1932 to this day. The existence of many models we sometimes do not know at all. But most importantly in this review I will try to cover.

I think most of us know that 90% of Zippo lighters made of thin sheets of brass, it is brass (Eng. Brass). If this model, solid brass, it is usually the color of the metal in her native - gold. Historically, such coverage not justified, solid brass models on a regular basis as production models were produced in about the 1980s.

Another thing is when we see Zippo conventional metallic color. This does not mean that, unlike the model Brass golden color, metallic color Zippo made of another metal, means. Just the same model taken solid brass and subjected to a special treatment - first nickel plating (nickel - surface treatment by applying to the product which the nickel coating, the thickness of the applied coating is usually from 1 to 50 microns, typically nickel-treated metal products made of steel or Other metals and alloys, particularly copper, zinc, aluminum, less manganese, titanium, tungsten or molybdenum), and then chromium plating - respectively applied on a surface of the nickel layer, a layer of chromium. Typically, this process is carried out by immersing the body of the lighter in a plating bath.
Of course, if we are talking about the usual classic chromed, not to mention the flavors of the surface of the body. When we look at different models of Zippo in the pages of online stores and catalogs, we can see the following descriptions: street chrome, brushed chrome, solid brass, black ice, black, green, pink matte, high polish, satin chrome etc. And what, indeed, is this term? Many times it seems that we are talking about the description of the material body, but, in fact, it's just kind of the case, that is, different variations of surface treatment of the body, rather than variations in the metal from which the case is made.

To begin to understand one by one, and then the description is based on the feeling that causes one or another surface, because to say exactly how it is achieved by one or another variation of the surface, that is, how, by what means, we, perhaps, no one will say. In principle, the most common types of cover are the following classic Zippo.

Brushed Chrome - polished surface, roughly speaking, in the form of longitudinal scratches. Probably one of the most common coatings on Zippo lighter.


High Polish Crome - polished surface, very often it is somehow confused with the surface of brushed chrome. Oh, and do not forget that it is possible as well and covering high polish brass, when it comes to models Zippo «golden" color, and of high polish sterling silver, if it is on the silver Zippo. Surface high polish is, so to speak, more solemn character.

Shiny, smooth, even-looking sliding coating can immediately draw the eye with its solid view!

Let's talk about polishing. Thus, polishing - this treatment the metal surface, which is performed after grinding or plating. Due to polished metal eliminated unevenness on the surface of the product. In manual polishing paste is applied to the felt and it makes a circular motion on the surface of the product (by the way, for those who are going to polish his Zippo!). Mechanical polishing perform polishing wheels made of felt or cotton fabrics, oiled pasta.

Grinding - is the metal surface treatment, which includes metal machining, during which significant irregularities are eliminated before polishing. For grinding Metals used abrasives natural or artificial origin, depending on the hardness of the product. Solid abrasives - corundum and silicon carbide - used for grinding of hardened steel, manganese bronze, etc. Emery grind ferrous and nonferrous metals; rouge (ferric oxide) or with pumice powder - brass, zinc, aluminum; polishing or Vienna lime - soft metals and alloys. Good polishing properties has a chromium oxide, so it is used for polishing of hard and soft metals.

Thus, it is possible to sum up a little, grinding and polishing - is not the same, but different procedures metal surface treatment prior to one another. Соответственно, brushed — шлифованная поверхность, polish — полированная.

Street Chrome — одно из самых “неприхотливых” покрытий.

Многие пользователи Зиппо предпочитают покупать именно модели с таким покрытием «на каждый день». Это обосновывается его очень высокой стойкостью, когда речь заходит об эксплуатационных качествах поверхности зажигалки. Спустя даже продолжительное время использования такой модели особых признаков износа, как правило, не наблюдается. Однако, опять-таки, не будем забывать, что многое зависит и от самого владельца. Конечно, если провести поверхностью зажигалки по камням или кирпичной стене, сохранять безупречно новый и безукоризненный вид вряд ли получится.

Satin Chrome — это очень особая обработка, поверхность как бы вся в мельчайших точечках. Что-то вроде бархата. Очень приятное на ощупь.

Ну, наверное, не зря оно называется сатин. Что такое сатинирование - технология лощения (итал. satinatura - лощение, придание лоска). Разновидность полирования. Выполняется специальными щетками с алмазными ворсинками, что позволяет добиться эффекта матовой, лощеной, слегка “состаренной” поверхности.

Далее, на что следует обратить внимание, так это на такое слово как solid . Например, Solid Brass . Это означает, что модель выполнена из чистой латуни без каких–либо сплавов латуни с другими металлами. Откроем небольшой секрет. Если рассуждать логически, то под любой моделью с хромированным покрытием, скрывается не что иное, как Solid Brass. Так что в принципе любая Зиппо, покрытая хромом на самом деле является обычной латунной Зиппо.

Zippo Solid Copper (англ. copper – красная медь) — это означает, что эта модель Зиппо выполнена из чистой красной меди (99,9%), без каких–либо сплавов с другими металлами.

Zippo Solid Titanium — соответственно полностью чистый титановый корпус, а не сплав! За всю историю Зиппо, была выпущена только одна такая модель в 2001 году под номером 110. Полное название Zippo 110 Solid Titanium.

But! Если Вы заглянете на сайты японских Зиппо, то можете встретить целые серии Зиппо со следующим описанием — titanium coated .

So! Не путаем, это обычные Зиппо с тонким титановым покрытием, в то время как, модель Zippo Solid Titanium вся изготовлена из чистого титана.

В одно время компанией Зиппо предпринимались попытки выпустить серии зажигалок из алюминия, но на счет алюминиевых Зиппо мы как–нибудь поговорим в отдельном обзоре. Главное здесь хочу упомянуть, что компанией применялась технология анодированного покрытия, а так же технология алюминиевого напыления. Нечто подобное покрытие нанесено на модель Solid Titanium.

Если вдруг когда–нибудь увидите Зиппо, у которой штамп не только на дне, но и на крышке, не пугайтесь! Это специальная серия Зиппо под названием Bottomz Up , у которой штамп есть не только на дне, как и у любой другой Зиппо, но так же и сверху на крышке, где Вы можете увидеть характерный значок, свидетельствующий о том, что эта зажигалка из серии Bottomz Up.


Solid Gold — думаю, сомнений не вызывает. Чисто золотой корпус зажигалки.
Касательно серебряных Зиппо ситуация несколько другая. С английского, слово sterling переводится как серебро высшей пробы . Однако сказать, что корпус изготовлен из чистого серебра тоже будет не совсем верно. Стерлинг (англ. Sterling [silver]) — название сплава из 92,5 % и выше серебра и 7,5 % других металлов, обычно медь (серебро 925 пробы и выше). Чистое серебро 999 пробы слишком мягко для создания больших предметов, поэтому его обычно сплавляют с медью, чтобы придать прочность и при этом сохранить пластичность и красоту благородного металла.

As ligature instead of copper or together with it attempts to use other metals to improve the quality - lower porosity, increased wear resistance for tinting coloring eliminate blackening. For these purposes, used germanium, zinc and platinum, titanium, and various additions - silicon, and boron. Однако фактическим стандартом остаётся сплав с добавлением меди.
It is obvious why we can not say Solid Silver - Silver model called Sterling.

Further, there are models such as Gold Filled and Silver Plate. Это, конечно, не золотые и не серебряные зажигалки, просто на них нанесен тонкий слой золота и серебра. So, way, Silver Plate - silvered surface of the body

Gold Filled - gilded. Models Silver Plate usually labeled the corresponding inscription at the bottom of the lighter.

A gold-plated, usually labeled gold filled or GF

Consider a series of lighters antique - antique silver, antique brass, antique copper.

Из названия серии понятно, что антик — это нечто антикварное и старое. These lighters treated with a coating to a lighter seemed old, passed through fire, water and copper pipes. But at the same time, for these conventional brass coating hiding Zippo, it will be noticeable after intensive use, when the outer coating starts oblazit. Accordingly, antique silver made ​​by vintage silver, Antique copper at red copper, antique brass vintage brass under the classic Zippo.

The prototype of this series - a series of Zippo Sunrise.

The same idea - Zippo Silver Sunrise, Zippo Brass Sunrise, Zippo Copper Sunrise. Только здесь покрытие уже сделано не «под старину», как в серии antique, а больше в современном и “авангардном” стиле. The result was a very nice series of interesting and unusual covers housing.

О моделях armor (армированный корпус) мы останавливаться подробно не будем, о них можно почитать здесь .

Smoothly move on to consideration of the coating "color" Zippo. For example, Zippo Black (Green, Pink, Red) Matte.

Слово Matte означает в данном контексте матовую поверхность. Take the usual brass Zippo, and covered with a layer of paint of a particular color. Соответственно, это не акварельные краски и не гуашь, а специально нанесенное порошковое покрытие путем спекания. Of course, neither of which metal red or black, for example, can be no question. To illustrate, here is an example of "black" Zippo:

Как вы видите, если заглянуть изнутри на крышку зажигалки, то можно увидеть желтизну, не что иное, как цвет металла, из которого сделан корпус.

Поскольку штамп на дне зажигалки является ее неотъемлемой частью для определения аутентичности, с 2003 года в компании Zippo стали специально снимать слой «краски» со дна зажигалки с помощью лазерной технологии на всех моделях matte, дабы пользователь мог легко разглядеть информацию, которую несет в себе штамп

Теперь поговорим о таких моделях, как 21063 Candy Apple Red и 21066 Cool Kiwi .

В данном случае, мы имеем дело опять-таки с «цветными» Зиппо, но поверхность этих зажигалок матовой, увы, не назовешь. Здесь уже была использована технология PVD (англ. physical vapour deposition; сокращённо PVD) — напыление конденсацией из паровой (газовой) фазы. Дело было в 2006 году. Уже позднее добавили еще три модели, покрытые с помощью этой же технологии — candy raspberry, candy teal, toffee.

А началось все в 2002 году, когда на очередном съезде коллекционеров и любителей Зиппо в честь празднования дня Зиппо была представлена технология PVD. Тогда же былы показаны модели из серии Spectrum, покрытие которых выполнялось с помощью этой технологии. Spectrum — очень красивое покрытие, чем–то ассоциируется с «хамелеоном». Видимо дает о себе знать богатая цветовая гамма.

По технологии PVD так же нанесено всеми нами любимое покрытие Black Ice.


Black Ice — достаточно красивое и оригинальное покрытие, которое, по сути, может «играть» в зависимости от освещения. С одной стороны, оно черное, но, с другой стороны, блестящее, зеркальное, соответственно может переливаться. Получается некая смесь в виде черного зеркального тонирования. Со временем, когда покрытие стирается, его прелесть при этом не теряется, а начинает свой новый цикл и предстает в другом свете!

Что же такое PVD-технология? PVD — это обработка поверхности металла в вакуумной среде путём воздействия на него молекулами других металлов для получения особо прочной и твердой поверхности изделия. Для процесса PVD-обработки в основном используются титан и цирконий. Метод PVD может применяться для обработки различных материалов, в том числе для нержавеющей стали и латуни. Заготовка из стали сначала тщательно полируется, после чего применяется PVD-обработка. Изделие же из латуни предварительно никелируется, потом хромируется и только затем наносится PVD-покрытие.
Главная ценность PVD-технологии заключается в способности модифицировать свойства поверхности изделия, не нарушая при этом свойства и биохимическую функциональность основного материала. PVD-покрытие чрезвычайно плотно и равномерно прилегает к основе, не содержит микротрещин, является защитным слоем, устойчивым к истиранию и появлению царапин. Процесс обработки поверхности происходит следующим образом: в закрытой вакуумной камере молекулы циркония «бомбардируют» поверхность металла и распределяются среди его молекул под воздействием высокого давления и температуры (до 1200°С). Затем, в течение 30 минут, металл постепенно застывает. Комбинирование вакуумного воздействия и процесса затвердевания даёт возможность получить покрытие, которое будет обладать уже качественно другими характеристиками.

PVD-поверхность устойчива к царапинам, ударам и механическим воздействиям. Слишком тяжёлые механические нагрузки могут привести к механическим деформациям материала, но при этом его характеристики, в том числе и поверхностные свойства на прочность, останутся неизменными.
Согласно описанию каталога, эта технология нанесения своего рода «прозрачного слоя» на поверхность зажигалки. И действительно, если внимательно приглядеться, это есть не что иное, как тончайшее напыление на корпус Зиппо!

Но если мы обратимся к этой модели Зиппо Black Licorice , то здесь по сути уже нанесен полупрозрачный слой на поверхность зажигалки.

Отдельно хочу поговорить о покрытии crackle .

В годы Второй мировой завод Zippo перешёл на выпуск зажигалок из стали, так как все остальные металлы считались стратегическими и использовались только в военных нуждах. Почти 100% продукции Zippo продавалось в Вооружённые силы США. The steel used in the manufacture of Zippo until 1945 inclusive. Зажигалки этого периода красились чёрной краской, и после краска запекалась, образуя так называемый Black Crackle — чёрный паутинчатый рисунок, или кракелюр. Делалось это для того, чтобы металлическая поверхность зажигалки не бликовала, давая тем самым вражеским снайперам удобный случай для выстрела.

Не надо путать это покрытие с покрытием типа matte. По сути, конечно, же, принцип один и тот же, и там, и там краска. Только вот если это matte — то это более гладкая поверхность, а crackle, наоборот, более грубая и шероховатая поверхность. Как правило, модели black crackle были основными зажигалками Зиппо в годы Второй мировой (и, кстати, такое же покрытие делалось в то время ещё на доброй дюжине других марок зажигалок).

Вот макро-фотография зажигалки Matawan с тем же покрытием Crackle. Не важно, что это не Zippo, суть одна и та же и главное, на что я хочу обратить Ваше внимание — это на само покрытие. Удивительнейший кадр, позволяет рассмотреть все в тончайших деталях, в том числе и саму, так называемую “паутинку”:

Очень красивое покрытие, но, конечно же, не вечное. Перед Вами пример Зиппо времен Второй мировой. Когда–то это была всеми нами любимая Zippo Black Crackle, но со временем краска облезла и осталась вот такая классическая стальная Зиппо:

Сегодня модели crackle , но уже различных цветовых решений можно найти на японском рынке Зиппо. Эта модель действительно пользуется успехом среди коллекционеров. Есть в ней что–то необычное.

Немного уйдем от темы и поговорим о некоторых особенностях самого корпуса, а точнее его материала.
Помимо металлического покрытия корпусов, в 1950 гг. компания Зиппо выпустила зажигалки с покрытием кожи разных цветов. Сегодня эти модели можно встретить на различных аукционах, они достаточно редки и стоят соответственно в виду того, что банальными и массовыми моделями их не назовешь. Они в свою очередь делились на модели, которые были полностью покрыты кожей:

А в 1952 году стали выпускать модели, которые были покрыты кожей частично:

В период 1951 — конец 53 гг. завод Zippo снова перешел на изготовление зажигалок из стали во время войны между Северной и Южной Кореей, в ходе которой США выступали на стороне Южной Кореи. Со временем сталь на зажигалках стиралась до характерной черноты, поэтому судить насколько это красиво — дело вкуса каждого:

В 1974 году компания Зиппо начала выпускать серию моделей Venetian с выгравированными на корпусе различными узорами из плавных, прямых и закругляющихся линий в венецианском стиле. Спустя более трех десятилетий серия Venetian пополняется все новыми экземплярами, привлекая внимание не только любителей зажигалок, но и ценителей красоты, так сказать эстетов. Каждая зажигалка из серии Venetian украшена узорами с обеих сторон.


В начале 1980х гг. пользовались популярностью модели Zippo из серии Ultralite .

Это были обычные модели с четырьмя пластмассовыми вставками, на которых соответственно наносилось изображение. Подробнее о моделях этой серии можно почитать здесь .

Еще одна серия зажигалок Зиппо, которые имеют не полностью металлическое покрытие — Zippo Scrimshaw .

Они стали появляться примерно в те же годы, что и модели серии Ultralite. Изображение наносится на акриловую поверхность зажигалки, которой покрыт корпус. Но об этой серии Zippo мы обязательно поговорим отдельно.

Одно из покрытий зажигалок Зиппо — эмалированная поверхность. Все мы помним удивительнейшей красоты Zippo Kelvinator в форме маленького белого холодильника. Так вот, ее поверхность не что иное, как эмаль.

Хоть это и не совсем относится к данной теме, но все же вспомним о модели Zippo Lossproof – Зиппо, защищенная от потери.

То есть это, конечно, не значит, что Вы никогда в жизни ее не сможете потерять. Просто к ней приделана специальная петля, которую обматывает шнурок. Таким образом, этим шнурком можно обмотать свое запястье и не расставаться с любимой Зиппо!

Ну и еще одна из выделяющихся моделей — Zippo Black Zip Guard. Отличительной особенностью данной модели является наличие своего рода резиновой «брони».

Обычная модель Brushed Chrome защищена оригинальным «панцирем», который в случае падения зажигалки, может принять весь удар на себя, тем самым смягчив неудачную «посадку». Такое покрытие сделано для удобства захвата зажигалки в руках.

В принципе, самые основные вопросы материала и покрытия корпуса мы рассмотрели. Постепенно перейдем к особенностям нанесения «декора». Если рассуждать логически, то каких–то чересур замысловатых и сложных приемов на пути следования к истине мы не встретим. Когда речь идет о серийных моделях, а значит и о крупномасштабном производстве, то здесь, как правило, используются наиболее «традиционные» методы нанесения изображения, а именно гравировка и “термопечать”. Перед вами Зиппо с изображением бочонков американского виски – бурбона под маркой Jim Beam.

Здесь как раз использовалась технология «термопечати». Являясь некогда владельцем этой Зиппо, могу сказать, что на ощупь отчетливо чувствуется, что рисунок нанесен поверх корпуса, несмотря на то, что на фотографиях все выглядит несколько по–иному. Но при этом сделано все аккуратно, качественно, никаких заметных следов, артефактов на покрытии зажигалки не осталось.

Другое дело гравировка. Здесь изображение или надпись нанесены В САМОМ ПОКРЫТИИ корпуса, а не поверх него.


То есть имеется в виду не просто печать изображения на поверхность корпуса. Рисунок, нанесенный с помощью печати, стирается достаточно быстро при очень активной эксплуатации. Достаточно поносить зажигалку в кармане с ключами, монетами, другими металлическими предметами пару месяцев или около того и, как говорится, результат будет на лицо. Некоторые из моих коллег просто стирали рисунки с помощью ацетона и грубой жесткой тряпочки. Тем не менее, это не значит, что рисунок облезет за один день. Все зависит от конкретного владельца. Пока вы сами «не поможете» вашей Зиппо, рисунок не сотрется. Хотя давайте не будем забывать о том, что ничто не вечно! По сути, как мне объясняли ребята из граверной мастерской, изображение наносится непосредственно на металл, из которого изготовлена основная часть корпуса, если мы говорим, например, о Зиппо, покрытых краской из серии matte. Ну а если это обычная Зиппо с хромированным покрытием, то тут все очевидно. Есть, конечно, другой способ гравировки — ручная. Например, Зиппо времен Вьетнамской войны. Всем нам хорошо известно, что зажигалки Зиппо порой были единственным кусочком «бумаги», на котором солдаты могли выразить свои чувства, мысли и переживания. Как например эта зиппо, на которой выгравировано - “Пожалуйста! Не говорите мне о Вьетнаме, ведь я там был.”

На современном этапе ручная гравировка – процесс дорогостоящий и используется, как правило, на эксклюзивных и ограниченных изданиях Зиппо.

Еще одним наглядным примером кастомной работы на зажигалках Зиппо являются шедевры от Пола Флеминга и Клаудио Мацци . Да, здесь речь идет о ручной работе, также возможны индивидуальные заказы от коллекционеров. Но соответственно, работы этих мастеров очень дорогостоящие экземпляры, поэтому о массовом производстве речь не идет. Многие работы Пола и Клаудио являются единственными в своем роде. Но, тем не менее, нам следует иметь в виду, что подобного рода способы нанесения декора на корпус Зиппо есть.

На данных зажигалках, изображение нанесено немного необычно, а именно с внутренней стороны корпуса, поэтому рисунок становится как бы выпуклым, благодаря чему смотрится интересно и оригинально:

Не забываем так же о серии зажигалок Зиппо Town and Country . Как правило, это тоже своего рода ручная работа, а именно ручная разрисовка изображения с последующим нагревом красок.

Один из способов нанесения изображений на корпус — это техника «trench-art» . Здесь можно говорить как о ручной самодельной гравировке, так и о приклеивании к корпусу Зиппо различных накладок, крестов, медальонов, монет, которые, в свою очередь, тоже несут в себе какое–то изображение. Некоторые из подобных экземпляров стоят не так уж и дешево, в основном, конечно, это винтажные зажигалки военных лет.

Among modern production models Zippo lighters as well meet with the "plates" but has not made independently, and at the factory Zippo.

Typically, these models differ in weight. They are heavier classical models without "overlays" and have a dull click when closing and opening of lighters.

In conclusion, let us Series Zippo Realtree ®.

On the surface this series lighters applied the so-called "camouflage picture", because it was assumed that such Zippo will appeal to fans of hunting and nature trips. On the "three-dimensional" drawings depicted branches, leaves, different shades, stalks, tree trunks with a high degree of detail and clarity in accordance with the technology high definition - high resolution. Sometimes an image can "play" according to the light that makes the lighter this series very interesting specimens.

On cleaning lighters

Sunday, January 31st, 2010

Often, old lighters into the hands of a completely unsanitary, with a thick layer of soot and dirt. In this case, very helps ultrasonic jewelry cleaner. His work is based on the fact that the special motor attached to a bath of water, creates oscillations with a frequency of tens of thousands per second (nominal frequency of most conventional cleaners - 42,000 Hz). Due to these fluctuations in the water formed millions of tiny puzyrikov not visible to the eye; they carry away particles of dirt from any hard to reach places. This cleaner can wash anything (and more exact, everything that is not afraid of water). In conjunction with a few drops of detergent results will be more than excellent.

Important: Do not confuse the real ultrasonic jewelry cleaner (ultrasonic cleaner) with cheap imitations that are not ultrasonic (they are usually fairly marked on the packaging as the Sonic cleaner). "Sonic cleaner" stands on Ebay 5-7 dollars (and in Russia 600-1000 rubles), but it really is a cheap toy and wait for the results of it is not worth it. Vibrations generated by its engine is too small, and the water formed a large bubbles. Of course, it is a little something to cleanse, but ... just a little. This jewelry cleaner is in foreign shops and Ebay from $ 40-50 and up. The box he must be written "Ultrasonic cleaner".

My device looks like this:

That's what state came into my hands recently, a Zippo:

Конечно, можно помыть просто щёткой, но уверяю: такой многолетний нагар придётся соскребать очень долго. Therefore, we place all this dirt in cleaner, pour hot water and add a few drops of mild detergent for washing, for example, Fairy. Instead chemistry may also be added a few spoonfuls of vinegar.

Let's go! Вода практически с каждой минутой становится всё грязнее, и видно, как струйки говна текут из всех щелей:

Я проделал в очистителе несколько трёхминутных циклов, после чего сполоснул зажигалку под тёплой водой и слегка прошёлся щёточкой — для удаления наиболее яростно присохших кусочков нагара, которые не сошли после ультразвуковых водных процедур.

Next - drying and assembly. Вуаля! Everything sparkles, almost like new!

Elvis Presley Zippo: полная история 1978-2008

Wednesday, January 6th, 2010

This paper is published in Russian for the first time. Это оригинальное исследование моего английского друга и коллекционера Гари Гилмора (Gary Gilmore), которое было начато им ещё несколько лет назад и завершено в 2009 году специально для ZippoCollector.ru.

Elvis the complete Zippos line 1978-2008 Worldwide

Этот каталог разделён на несколько частей. First, go lighter, issued only for the US market. Separately, you will learn about Zippo, issued by Germany, Japan, France and Spain. I'll also show pictures, which were used in the design of lighter over the years devoted to Elvis.

Date lighters made in accordance with the official catalog and partly reconciled with lighters from my personal collection. Использовалась также информация из книг про Zippo, а также помощь других коллекционеров, моих друзей и фанатов Элвиса.

Each lighter is accompanied by my personal rating rarity: 1 star for ordinary production model to 5 stars for the rarest instances.


Zippo Elvis Presley, released for the US market

For the first time the image of Elvis Presley in the lighter Zippo appeared in 1978. However, the first official release was made only in 1987. All that was before - an extremely rare prototypes.

1978, Elvis standing
Модель: High Polish Chrome
Rarity: *****
The test prototype. This is the first Zippo existed with the image of Elvis. I never have been on sale.

1982, Elvis bust
Модели: Brass, High Polish Chrome, Brushed Chrome, Gold Plated
Rarity: *****
There are also test prototypes made in four versions buildings.

Next limited release lighters held in 1986 to commemorate the 10th anniversary of the death of Elvis Presley.

1986, Elvis 10 years On
Модель: Solid Brass
Rarity: *****

В конце 1986 и начале 1987 года было выпущено сразу несколько разных моделей Zippo. Эти модели продавались очень хорошо и положили начало коллекционному увлечению Zippo с иображениями Элвиса.

1987, Elvis (full colour) bust slim
Model: High Polished Chrome, Brushed Chrome, Brass
Редкость: ***, **** (Brass)

1987, Elvis (full colour) bust
Model: High Polished Chrome, Brushed Chrome, Brass
Also known prototypes in the processing of Grey Matt finish.
Rarity: ***, ***** (Grey Matt), **** (Brass)

Next, in 1987, produced several separate lighter and a whole set of 8 pieces, which also sold very well.

1987, Elvis 50 years with (некрашеная гравировка)
Модели: Slim и Regular High Polished Chrome
Rarity: **

1987, Elvis 50 years with (gray and black engraving)
Модели: Slim и Regular, Brushed Chrome и High Polished Chrome
Rarity: **

1987, Elvis with guitar
Модель: Slim High Polished Chrome
Редкость: ***

1987, Elvis with guitar
Модель: Regular High Polished Chrome
Rarity: ****

Некоторые из этих зажигалок были также в составе набора, в который входили 8 зажигалок: 4 обычных модели и 4 модели slim. This set was manufactured in a wooden frame with a stand. Such a set could be purchased only in its entirety with all lighters (frame itself was not sold separately).
Rarity: ****

In 1988 he was the only one vupuschena malotirazhaya model Zippo Elvis.

1988, Elvis 50 years with
Модель: Solid Brass
Rarity: ****

In 1990, test samples were produced new lighters that were not commercially available. Такие Zippo после этого были выпущены официально только в 1999 году для немецкого рынка.

1990, Elvis singing (full colour)
Модели: High Polished Chrome, Black Matte
Rarity: *****

Следующая модель с Элвисом была выпущена только через восемь лет. В 1998 году состоялся концертный тур под названием “Elvis Presley In Concert”, в котором участвовали члены группы Элвиса Пресли, а в живых концертах использовались видеозаписи самого Элвиса. Это послужило толчком к возрождению интереса к его творчеству и появлению новых поклонников.

1998, Elvis King of Rock n Roll
Модель: Matt Chrome
Rarity: **

В 1999 году была выпущена зажигалка Elvis Aloha, которая иногда встречается в продаже в жестяной коробке серии “Звёзды Голливуда” (The Stars of Hollywood), однако именно эта модель не входит в звёздную серию. Серия “The Stars of Hollywood” вышла только в 2000 году, и включала в себя три зажигалки с изображениями Элвиса Пресли, Джеймса Дина и Мэрилин Монро.

1999, Elvis Aloha
Модель: High Polished Chrome
Редкость: ***

2000 годы был очень продуктивным для коллекционеров Zippo с Элвисом Пресли, в этом году был выпущен второй в истории набор зажигалок Elvis Presley.

2000, The Elvis Collection Boxed Set, 4 зажигалки
It includes:
Zippo Elvis 56, модель High Polished Chrome
Zippo Elvis with guitar, модель High Polished Chrome
Zippo Elvis Presley Gold Record, модель High Polished Brass
Zippo Elvis Face, модель High Polished Chrome
Редкость: ***

Также в 2000 году были выпущены следующие зажигалки:

2000, Elvis Artist of the Century
Модель: Brushed Chrome
Rarity: **

2000, Elvis Face , из серии Stars of Hollywood
Модель: Brushed Chrome
Rarity: **

2000, Elvis Face & Guitar
Модель: Brushed Chrome
Rarity: **

2000, Elvis Sweater
Моедль: Brushed Chrome
Rarity: **

2000, Elvis Leather
Модель: Street Chrome
Rarity: **

В 2002 году отмечалось 25 лет со дня смерти Короля рок-н-ролла. Компания Zippo в этом году выпустила первый и единственный набор из зажигалки и авторучки, посвящённый Элвису.

2002 Elvis Jailhouse Rock
Модель: Street Chrome
Rarity: **

2002 Elvis EP 25th Anniversary regular size
Модель: High Polished Chrome
Упаковка: картонный конверт с надписью 'EP 25′
Редкость: ***

2002 Elvis EP 25th Anniversary Zippo and Pen Set
Модель: High Polished Chrome
Упаковка: специальная коробка
На ручке выгравирован автограф Элвиса и надпись 'EP25′. Ручка также была выпущена отдельно, не в наборе.
Редкость: *** (набор) / ** (только ручка)

2002 Elvis Heart Emblem (обыная и slim модели)
Модель: Street Chrome (это также была последняя в истории выпущенная модель slim, посвящённая Элвису)
Редкость: * (обычная) / *** (slim)

2002 Elvis Repeat Squares
Модель: High Polished Chrome
Редкость: *

В 2003 году было выпущено несколько новых зажигалок, посвящённых Элвису, в том числе одну из самых редких и ценных для коллекционеров. Это была зажигалка, выпущенная специально для членов клуба коллекционеров Zippo Click. Она продавалась только на сайте клуба Zippo Click, а также через официальный клуб коллекционеров Offical Elvis Collectors Club.

2003 Elvis in the Army .
Ограниченное издание клуба Zippo Click 500 экземпляров, с специальной упаковке и с сертификатом подлинности.
Rarity: *****

2003 Elvis Blue Anodized
Модель: Brushed Chrome
Rarity: **

2003 Elvis Guitar
Модель: High Polished Chrome
Редкость: *

2003 Elvis The King of Rock n Roll
Модель: Street Chrome
Тираж: 5000 экземпляров
Упаковка: специальная коробка с сертификатом подлинности.
Rarity: **

2003 Elvis Silhouette Plate
Модель: High Polished Chrome
Редкость: *

В 2004 году с компанией Zippo стал сотрудничать новый художник, делающий зажигалки, посвящённые Элвису. Это имя — Джо Петруччо (JOE PETRUCCIO). Это было начало очень удачного сотрудничества для компании и для коллекционеров.

В 2004 году также отмечалось 50-летие исторической песни Элвиса “That's all Right”, записанной в 1954 году.

2004 Elvis He dared to rock
Ограниченное издание 4000 экземпляров, в специальной коробке.
Модель: Sapphire Blue
Редкость: ***

2004 Elvis Gold Record Logo
Ограниченное издание 4000 экземпляров, в специальной коробке.
Модель: Golden Brass
Редкость: ***

2004 Elvis
Модель: Black Matte
Редкость: *

В 2005 году вышла только одна Zippo, посвящённая Элвису.

2005 Elvis Trouble
Модель: Mood Indigo
Редкость: *

В 2006 году было выпущено больше всего ограниченных изданий, посвящённых Элвису, чем в любой предыдущий год. В том числе — первая Zippo с двусторонним дизайном, посвящённая Элвису.

2006 Elvis First Album 50th.Anniversary
Двусторонний дизайн.
Модель: Solid Brass
Ограниченное издание 2000 экземпляров, в специальной коробке.
Rarity: **

2006 Elvis Heartbreak Hotel. 50th.Anniversary
Модель: High Polished Black Ice
Ограниченное издание 2000 экземпляров, в специальной коробке.
Rarity: **

2006 Elvis Love Me Tender. 50th.Anniversary
Модель: High Polished Chrome
Ограниченное издание 2000 экземпляров, в специальной коробке
Rarity: **

2006 Elvis Graceland 50th Anniversary
Модель: Solid Brass
Ограниченное издание 5000 экземпляров, в специальной коробке
Rarity: **

2006 Elvis Memories
Модель: Street Chrome
Редкость: *

В 2007 году впервые увидела свет зажигалка Zippo, посвящённая Элвису и украшенная кристаллами Swarovski.

2007 Elvis Bling .
Модель: Brushed Chrome, украшена кристаллами Swarovski
Ограниченное издание 10,000 экземпляров, в специальной коробке.
Rarity: **

2007 Elvis has left the building
Модель: Satin Chrome
Редкость: *

2007 Elvis Lives
Модель: Purple Shimmer
Редкость: *

2007 Elvis Monochrome
Модель: Satin Chrome
Редкость: *

2007 Elvis Lives
Модель: Satin Chrome
Редкость: *

В 2008 году вышла зажигалка с той же фотографией на коробке, которая была и на коллекционной Zippo 2003 года, выпущенной клубом Zippo Click.

2008 Elvis Military Induction
Модель: Black Ice
Ограниченное издание 10,000 экземпляров, в специальной коробке.
Редкость: *

2008 Elvis Guitar
Модель: High Polished Chrome
Редкость: *


Zippo Elvis Presley для немецкого рынка, 1999-2007

В Германии очень развито движение коллекционеров тематики Элвиса Пресли, отчасти потому, что Элвис проходил военную службу именно в Германии. Первая Zippo для немецкого рынка, посвящённая Элвису, вышла в 1999 году. С тех пор выпускалось очень много “немецких” экземпляров.

1999 Elvis singing
Модель: High Polished Chrome
Этот дизайн был впервые выпущен в США в 1990 году в качестве тестового образца; в 1999 он вышел в Германии уже как серийный дизайн.
Rarity: ****

1999 Elvis Face & signature
Модель: High Polished Chrome
Редкость: ***

2000 Elvis Face & signature
Модель: High Polished Chrome
Редкость: ***

2000 Elvis The King of Rock & Roll signature
Модель: High polished Chrome
Редкость: ***

2007 Elvis Rocking
Модель: High Polished Chrome
Rarity: **

2007 Elvis Lives
Модель: Brushed Chrome
Редкость: *

2007 Elvis Has left the building
Модель: Candy Apple Red
Редкость: *

2007 Elvis Blue Stance
Модель: High Polished Chrome
Rarity: **

2007 Elvis Star
Модель: Brushed Chrome
Rarity: **

2007 Elvis Is
Модель: Rainbow Spectrum
Редкость: *

2007 Elvis Lives
Модель: Black Ice
Редкость: *

2008 Elvis Has left the building
Модель: Brushed Chrome
Редкость: *

2008 Elvis Black (by Joe Petruccio)
Модель: Black Matt
Редкость: *

2008 Elvis Music (by Joe Petruccio)
Модель: Brushed Chrome
Редкость: *

2008 Elvis Guitar (by Joe Petruccio)
Модель: Brushed Chrome
Редкость: *


Zippo Elvis Presley для японского рынка, 2004-2005

В Японии 12% жителей являются фанатами Элвиса Пресли (по официальной статистике). Это более 15 миллионов человек. Один из наиболее известных из них — Дзюнъитиро Коидзуми, бывший премьер-министр Японии.

Первая Zippo для японского рынка, посвящённая Элвису, была выпущена в 2004 году.

2004 Elvis
Модель: Japanese Sterling Silver
Специальная упаковка
Rarity: **

2004 Elvis Monochrome No.1
Модель: Black Ice
Rarity: ****

2004 Elvis Monochrome No.2
Модель: Black Ice
Rarity: ****

2005 Elvis Standard No.1
Модель: Brushed Chrome
Rarity: ****
2005 Elvis Standard No.2
Модель: High Polished Chrome
Rarity: ****
2005 Elvis Standard No.3
Модель: High Polished Chrome
Rarity: ****

2005 Elvis Blue Hawaii
Модель: Blue Ice
Ограниченное издание 250 экземпляров, в специальной упаковке
Rarity: *****

2005 Elvis Blue Hawaii
Модель: High Polished Chrome
Ограниченное издание 250 экземпляров, в специальной упаковке
Rarity: ****

Две последние модели Zippo — самые редкие (250 экземпляров) из всех, когда-либо выпускавшихся и посвящённых Элвису Пресли.


Zippo Elvis Presley для французского и испанского рынков, 2005-2009

2005 Elvis Dancing (Испания)
Модель: Brushed Chrome
Rarity: ****

2008 Elvis Blue Guitar (Франция)
Модель: Blue Matte
Rarity: **

2009 Elvis Betty Harper (Франция)
Модель: Street Chrome
Редкость: ***


Оригинальные фотографии Элвиса, которые использовались на разных Zippo

Gary Gilmore

Зажигалка Thorens, 1920-е годы

Пятница, Ноябрь 20th, 2009

Thorens — одни из самых хитроумных и интересных зажигалок, они производились в Швейцарии ещё с 1920-х годов и представляли собой очень точные устройства. Уже самые первые модели этих зажигалок были автоматическими: крышка открывалась сама при нажатии на кнопочку и при этом сразу загорался фитиль. Внутри Торенса — довольно сложная система из пружин, крючков и прочих деталек, всё это очень прецизионно собрано в прочном медном корпусе и отлично работает и через 90 лет!

А вот видеоролик на французском языке, из которого понятен принцип работы зажигалки Thorens:

The Zippo. The Flame. The Light.

Tuesday, October 20th, 2009


© botas

Как фотографировать зажигалки

Понедельник, Сентябрь 21st, 2009

Фотографировать зажигалки — процесс на первый взгляд тривиальный, но результат часто оказывается далёк от идеального. Наиболее часто проблемы возникают при съёмке полированных поверхностей (high polish, black ice и т.д.), в которых всё отражается. В результате часто получается чёрти что.

Здесь я делюсь профессиональным секретом — как снять зажигалку красиво в домашних условиях. Нам понадобится несколько листов белой бумаги и цифровая фотокамера.

А теперь секреты.

First, we need to create a sheet of white paper LiteDome to avoid unwanted reflections in the polished faces of the lighter, and also to provide uniform distribution of light therein. Ideally, all edges must be reflected white sheet, then the surface of the photograph will smooth and even, without unnecessary reflections.

You can use any light, natural light from the window to the table lamp. Lighter - a small thing, but softbox will provide even illumination. I use ordinary table lamp, illuminating the subject from above, from the front.

It is best suitable SLR camera, but good results can be achieved and compact. The main thing - to push the zoom lens to the maximum in order to avoid trapezoidal distortion. Compact camera, set against the lighter will give good results in macro terms of quality, but the shape of the object strongly distorted as The figure to the right example. This is bad, because Zippo in life is not a trapezoid. So - to maximum zoom, the camera moves back as much as possible from your subject, but so that the lighter has taken the entire frame.

More - it is important to set the white balance on the camera, so the output does not get a picture with a strong yellow or blue tint. If your camera supports only the choice of pre-installed settings, choose the balance for daylight, incandescent or fluorescent lamps according to your lighting fittings. For SLR camera I always put white balance on the model: first photograph just a white sheet of paper at my light, and then tells the camera that the balance necessary to expose this image. As a result, the white image will always be white or yellow and not blue.

And finally - when shooting aperture should be covered as far as possible and desirable camera must stand on a tripod or table, as shutter speed can get long.

The result obtained in compliance with all of these tricks, usually requires only the most minimal finishing in Photoshop (cropping, levels, light white balance correction). And it looks like a million :)

Well, the picture finally: What is the process and the result looks like.

Change fuel cartridge for Zippo: unrealized invention

Saturday, September 12th, 2009

In 2004, Zippo has patented a rather unusual thing: a removable fuel cartridge for lighters. According to the plan, such plastic fuel cartridges were bought in reserve instead of bottles with gasoline and plugged directly into a specially modifitsirovannny insert. The principle of operation is clear from the first pair of images: the wick is in a tube with a sharp end that plastic fuel tank with a punctured during installation to insert:

At first glance, everything is very convenient and simple, however, it left open the question of compatibility of the cartridge has previously released five hundred million inserts :) The second pair of illustrations shows an alternative embodiment of the cartridge and its use (without a special tube for the wick), but this is not the way convenient as option number one:

В общем, это изобретение пока так и осталось на бумаге… хотя кто знает, может быть, через несколько лет мы и увидим нечто подобное в серийном производстве.

Желающие могут скачать PDF-файл с патентом целиком.