ZippoCollector.ru

Diokhan, you can open and eventually freaks will be less and less. )))

good time of the day you ...

I'm the first post ...

and what was to rearrange the wheel and thereby spoil another lighter? As written in my passport ZIPPO warranty for life. you need to send it to them and they will send exactly takuyuzhe only new. It is necessary only that there is a room downstairs was unhurt ...

Message edited 20:12 - March 9, 2010 user Cyberpunk

Oh how I love fake "zips" for 150-200 rubles)) They can fulfill different modernization (such as a complete sealing insert is described here), take them to a hockey game in place using washers and then look at how much modification is successful, as well as warm up to red, cook together with sausages and just throw in his likes =)

Car sealant - not an option, petrol nafig all peels and just burns.

/

Insert smear grease on the outside for better sealing - no way, zagazhevaetsya wool, wick. And if it be obezYanom and spark can lose - will all wash.

/

Ordinary solder (ie tin) - there are different alloys. From plastic and fusible to Soviet monsters that barely melted at 380-400 degrees. Last preferably - enough for a long time (even after hockey =))), but it is necessary to put a thick layer and the more "field" captured the better. By the way for alterations in Flint gas petrol and vice versa. About fluxes and sandpaper not forget.

There are brass, but disagreement with her pack. Her father brazed radiators our machines and how to speak century.

/

The rubber gasket on the bottom (not real rubber polymer damn!) - And even a decent yield. Useful for those "zipam" zippo and who visited the same hockey)) dents or simply insert plohoo adjacent to the shell. The only thing that - insert can "jump" >> stupid little Gnehm side (long) wall of the insert out. As for the "zip", the reliable option - to put on the screw. Sui insert without running up to the stop in the shell and drill a hole to the diameter of the selected screw (wool inserts to remove the time!). Drill side, if hunting is to make fun of both (long) sides. Solder the nut on the inside of the insert and all - ready modifiers. Condition - straight arms, otherwise will stink more than a day and petrol will not keep.

/

Modifiers in armor - soldered / fixed two steel screws plostiny (2-3mm thick) to the long sides zips with recess under iskrovyplevyvatelya wheel, a small extension to the loop so that constant contact with the lid and drilled holes on against the windscreen. What is it good for the unfortunate lighters:

1. Improves heat capacity "zips" (less petrol is eroding)

2. Plates act as guides for caps and protects against progression of backlash.

3. Just protect sizing inserts. Not 100% but it's better than on "naked" body ordinary "zip" and zippo.

Overall hockey provided =)))

Ideal in this respect - the case of 4-5x mm steel with a powerful loop that arms do not just collapse. But this is not enough direct hand, you need equipment.

/

Complete seal - still pack in the project but the idea is as follows:

Removal beyond the loop "boxes", the setting items on the principle of sealing the cap, as well as installation of the lock. As an illustrative example awl-10.

/

At the expense of good sizing options no, you still have to re-climb and promazyvat. It is still metal.

ps Was a real zippo - Grandfather gave an anniversary. Got me, then someone else - svisnul with the jacket)

in truth cyberpunk))) so it is what all is done, for playing "hockey"???

In my opinion, this forum post - candidate to favorites without noodle :) Bravo, Cyberpunk, zhzhosh! :)))))

Did not expect 8 -] Thought remove even did not register.

/

And look here about the recovery of sizing can find what's new. Nenashol and decided to unsubscribe to their everlasting burnings "tipazippilah")

/

In sober hate hockey. But when we get together, a little vdarit, then another one for the road, two liters, IRS raced ... What putter which washers))) All are hoping to get home safe and not vredimymi, taking with them only what is re-quired. Winter - ice hockey, well, damn summer ... hello America in general))). Our ever-sober street is well lit and in place of asphalt - bruschatka, seen and heard where flies miracle 93m gasoline. Pak go (or rather begem and fall))) to the stop - play this perverted game X-]

/

In the morning, the morning scary movie in the mirror. Web camera also translates face some drowned. In the hands of something that lights up than usual.

From this moment vobschem and went different moderniratorschina.

/

\ \ By the way boiled sausages perfectly. Taste ... hard to explain, but it was delicious. Ate. Started cleaning the kitchen and found a brightening water kostryuli zipovinu, which until recently smeared with grease and tucked ... Throw in a jar and poured alcohol. Evening tucked - lit. Subsequently, "flaked off" chrome windshield and the body of the insert. Rust turned appetizing.

/

At the expense of modifiers in armor - our terrible evening that led to my "zips" into a wide crack in the bottom of the housing grazyaschaya break into two halves. Go to buy a new ... it was a pity the old one, which is already rooted. Pour solder was useless - split again. Took housing companies (y mene computers x]) and cut plates for further prisobachivaniya to lighter. Shlifanul, frizzled hair dryer with flux (acid + Zn), slapped. Do not soak the flat bracket and added that the two halves do not razehalis if bad soldering. Looked ... and added a screw and nut. A month to change the disk on the plate with runners and a new loop (native died). Clamp turned into something like naprisovannogo cover for the bottom. Solder reinforced by two bolts "8." This turned out n **** I bollocks, many eyes rejoiced (synchronous Margot neon light). Nails it did not score, but the puck was excellent 8 -]. Zlaschastny come December. The exam was in the loop, well, knowing my love for computers, drinking and cheating - asked all put on the table. After the exam has missed perachinnika and lighters. Labarantka waved her long curly head against all that is supposedly all on the table. All searched ...

I think collect GadZippillo'ver .2 or even your own from scratch.

/

In GadZippille'ver .1 resolved the problem fragility "Zippy" in relation to both the hockey players)) and a simple black type daredevils climbers.

/

At the expense of a complete seal. Over the "Zippy" did not scoff, she remained with me one)). Collected his version. Served as the starting material of the capacitor C50-12 25b 5000mkF 8712.

Insert the easiest for 2 hours spoyal. Protikaet infection. But all the disadvantages incontinence zip decided case =). The evening ended in the morning went to smoke. Lighter opened and heard a pleasant sound - "a bunch" like the sound of a bottle of champagne unsealing, only much quieter and no foam =))).

When closed, the sealing is complete. How to gather phone - Skins photos.

Message edited 16:40 - March 11, 2010 user CyberPUNK

Here own deepzip'ver .1.1 which can safely give the diver)

/

http://i062.radikal.ru/1003/e0 ..... 54cf7a.jpg

http://s003.radikal.ru/i203/10 ..... 919e7c.jpg

http://s006.radikal.ru/i213/10 ..... 77d105.jpg

http://i050.radikal.ru/1003/ab ..... 2a771f.jpg

http://i073.radikal.ru/1003/79 ..... 95fa26.jpg

http://s004.radikal.ru/i205/10 ..... 30bfe6.jpg

/

Insert hlipkovat, but normally copes with its functions, honestly speaking, do not care where gasoline burn))

> Wick: wick candles vletennye + wire + wire from the most simple wool.

> Wheel of Gas Lighter Ronson who could not survive our passionate love =))

> Flint and the spring sitting in the body of the antenna tape

> Wind-shield - cut from sheet metal housing companies

> The body of the insert of the same material.

> Case - K50-12 capacitors 25b 5000mkF 8712

> Ring - was in the condenser underneath naprisovannoe ring from the body of the capacitor so that insert is not falling down.

/

Test passed. Wind, cold dog and Exclusion tool. It was amusing to watch as four hands flicking through ruble zyazigalki gas, then when I was smoking and otkravenna mocked))

/

On the mechanism of opening / closing still have pokarpet. But it is already in the next version. This version is good because it can be used also as a glass =)

/

Have little idea about the spring on the spring avtopodzhiga course, what would the diver did not dry hands before smoking => "chpok-lit" 8 -]

kypexin writes:

About what class :)) This trench art! Go even show off forum vintagelighters.ru, there are lovers of homemade lighters, they will appreciate :)

Seems I gathered plagiarism. Pts similar to Luxuor 20s

Cyberpunk, well you Zhgoon, I lay just))) hammer! let ischo for astronauts zazhimalku kostruiruy and straight to the Baikonur try.)))

I found my kindred spirit! :)

but at the expense of Gagarin - tough!

"Jumped in the midst of charred Bun secretly and took a cigarette stored. Lit from raskolennogo body pulled accidentally fallen under attack hare steel ball, planted on the radio antenna and bungled currently kebab 8 -] "

it's just a fuck! :)))

Drawing exactly do) As for voplascheniya metal here will have to wait no mnu carpentry workshop, there Toko soldering vykalupyvatelnye hand sharpened under computers =)

Colleague, and you just work in the hospital? Are you sure that you have chosen the right profession? with such skills would you engineer aviation space to work! :))))

Message Edit 2:17 - March 13, 2010 user Cyberpunk

Under way, each case has its own music all lighters made ​​under Mouzon - http://narod.ru/disk/187067050 ..... _the_Game_ (Clean_name). mp3.html

8 -]

basically explains my nickname all =)

Придется долго работать над ламинарностью потоков. Ладно мужики, до скорого.