Post |
---|
| nagato0309 - Member 22:02 - May 17, 2012 Posts 21 |
| |
| Hello, dear users zippocollector.ru.U me to you one more question about buying a wonderful zippy.) I need for long-term use, for tryukov.Vybirayu between three zazhigalkami.Po each lighter I wonder a lot of things, but I'm going to ask the most important questions . 1 model Zippo 162 Armor.U me about it that's what a lot of voprosy.Na whether it is heavier than the standard model? She is also well set up? With front and rear of it brushed chrome, and on the sides blestyaschaya.To most brushed chrome coating it is polished, or is it just a pad. (maybe someone that question seems silly, but I'm really a novice, do not understand) Can get scratched lighter to such an extent that it will be seen metal itself, which under cover? And still a question whether it is possible to do with the lighter tricks? 2 Model Zippo 200.Voprosy those same as with the 162 model, but then I chose a small inscription Zippo quickly whether this inscription erased? And the same question whether it is possible to do tricks? 3 Model Zippo 250 hight polish chrome.Voprosy approximately similar, but here I would like to ask about whether it pokrytie.Mozhet erase up to the metal? Or it will be many years later scratched, but the cover does not come down? And another question, when performing tricks Will it slide? About everything I wanted to know, I asked voprosy.Zhdu early reply, tomorrow I'll go pokupat.Otvette please be more specific, I just 0 in these cases as simply zippo pictures nravitsya.Budu very very grateful for your answers. |
|
| Muratof - Member 22:37 - May 17, 2012 Posts 40 |
| |
| Two years wear 168 Zippo Armor Brushed Brass, but it uncoated, fully brass, sometimes do the trick. By weight, a little heavier and thicker classic, but a matter of habit, after the classic seems easy and weak in the execution of tricks. As for wear coatings, it is necessary to take into account that the execution of tricks accompanied by the inevitable fall jig, hence the chips and scratches, and possibly deeper, to brass. But if you constantly stunt, then do not be afraid to wear as much coverage as physical damage to any of the body (mainly cover falls off), or insert. Firing live up to a year, at its already changed the insert, which broke the record that urge cam. Tricks kill ours neubivaemaya lighter (((. |
|
| nagato0309 - Member 23:21 - May 17, 2012 Posts 21 |
| |
| And how to understand without covers ... I found a shop in which I want to buy a Zippo your 168th model, if I'm not mistaken it bruzhed chrome, it's your http://tabak-kazan.ru/content/.....-168-Armor ? |
|
| Muratof - Member 23:30 - May 17, 2012 Posts 40 |
| |
| Message Edit 8:38 - May 18, 2012 user Muratof
She is the most! Brushed Brass - satin brass. All Zippo (exception - red copper, titanium and gold. Metal) is made of brass, and after or color, or coated with nickel. My model is purely made of brass, so it can only darken, but it is treated by polishing, and the models that you have chosen, covered with a layer of nickel. |
|
| Muratof - Member 23:36 - May 17, 2012 Posts 40 |
| |
| By the way, a normal shop, he ordered a couple of times there. |
|
| nagato0309 - Member 23:40 - May 17, 2012 Posts 21 |
| |
| Well, as I understand if this is the nickel peel, there will be such a same (or about) how are you, and the way to your cigarette lighter, and indeed not only in your country, and on the lighter coated chrome bruzhed this layer "brusheda" a polishing pad or sealed, I just wondered if the armor is practically no different from the classics then take it, but the silver color. |
|
| Muratof - Member 23:45 - May 17, 2012 Posts 40 |
| |
| Polishing as horizontal lines, still referred to as brush strokes. Whatever you took that Brushed that Polish, over time, with the active use, they are covered by a multitude of small scratches and becoming practically indistinguishable. |
|
| nagato0309 - Member 0:00 - 18 May 2012 Posts 21 |
| |
| I would thing that would have peeled the coating, as you said "nickel layer" .and since the time will not be erased if the stamp at the bottom?'s Either 200 or 162, I do not know, I can say at least 10 lighters order, come to the point of self-delivery and choose to pay. |
|
| xidemonix - Expert Moscow, Russia 0:10 - 18 May 2012 327 posts |
| |
| Message Edit 0:11 - May 18, 2012 user xidemonix
armor already so to speak under the stunts are not particularly popret (but of course stunt is possible on any cases until then ...) as well as heavier and loosening of the cover, etc. etc.. So what can be considered the most normal for such Zippo brushed or street chrome. Pulverize can be any, will come down, and chromium, and that under it and will show off the brass, but the problem is the fact even nice and vintage, and tired to wash :) - it will fall apart faster than erased |
|
| DenOn - Expert 0:10 - 18 May 2012 212 posts |
| |
| I do not know what to do with Zippo to kill bottom stamp ... for tricks - book the cheapest, so it was not a pity to kill. when he try - you will understand. brashd chrome - quite suitable for this purpose. | "How did you get there with villains? Bute? Serves "(c) |
|
| nagato0309 - Member 0:19 - 18 May 2012 Posts 21 |
| |
| Message Edit 0:20 - May 18, 2012 user nagato0309
Thanks for the answers, I decided to still take the 200 model, as long as that surface "brush stroke" even after the peel nickel ostalas.I still be goy paste polish a few times a month. |
|
| nagato0309 - Member 0:22 - 18 May 2012 Posts 21 |
| |
| And by the way, after the nickel come it will be brushed brass? Or something else. |
|
| xidemonix - Expert Moscow, Russia 1:02 - 18 May 2012 327 posts |
| |
| if you take the chrome, something about pasta goy can forget, why it is needed. How many layers after brass-hell knows, nickel plating, chrome-fade will be a long time before the brass. |
|
| nagato0309 - Member 1:07 - 18 May 2012 Posts 21 |
| |
| If not difficult to explain how it will look 200 model after nickel gone, and if not difficult to throw off the photos, if you have, please. |
|
| xidemonix - Expert Moscow, Russia 1:28 - 18 May 2012 327 posts |
| |
|  many do not live :) |
|
| Muratof - Member 8:50 - 18 May 2012 Posts 40 |
| |
| As you can see in the photo, Laid Dmitry - xidemonix, from the brush strokes a little that remains, but that would bring the jig to a state or require a certain number of years, or extra effort (grinding abrasives). |
|
| kypexin - Administrator 10:51 - May 18, 2012 1670 posts |
| |
| Muratof writes: As you can see in the photo, Laid Dmitry - xidemonix, from the brush strokes a little that remains, but that would bring the jig to a state or require a certain number of years, or extra effort (grinding abrasives).
This way my cigarette lighter :) but sorry 1947 and has already got me here in this form :) Although any other brashd chrome will theoretically look like when erasing coating already 10-15 years probably. But what about the way brushed brass I also monitored. I had a new yellow brushed brass which I carry with me to this day is about 4 years and every day use. So here it is, interestingly enough, eventually lost all signs of brushed and original brightness of the surface and become a beautiful dark yellow copper color, but absolutely smooth :) | |
|
| nagato0309 - Member 11:17 - May 18, 2012 Posts 21 |
| |
| Well, thank you very much for all the answers, everything is clear and specifically explained, I will take 200 model, for 10 years a lot has changed and may I will collect Zippo who znaet.A you, kypexin, could not upload pictures of their brushed brass if not difficult? |
|
| nagato0309 - Member 14:33 - May 18, 2012 Posts 21 |
| |
| A solid brass cover that like? On the picture is very similar to brushed brass, but the name is different. |
|
| Gorynych5 - Maniac Moscow 14:38 - May 18, 2012 1860 posts |
| |
| Photos not mean quality. Solid Brass and Brushed for they correspond High Polish and Brushed chrome for copies. |
|
| kypexin - Administrator 16:00 - May 18, 2012 1670 posts |
| |
| nagato0309 writes: Well, thank you very much for all the answers, everything is clear and specifically explained, I will take 200 model, for 10 years a lot has changed and may I will collect Zippo who znaet.A you, kypexin, could not upload pictures of their brushed brass if not difficult?
 | |
|
| Muratof - Member 1:40 - 19 May 2012 Posts 40 |
| |
|
| xidemonix - Expert Moscow, Russia 4:48 - 19 May 2012 327 posts |
| |
| nagato0309 writes: I need for long-term use for tricks.
This is nonsense :)
|
|
| nagato0309 - Member 0:36 - 20 May 2012 Posts 21 |
| |
| xidemonix, maybe you did not read all my posts, or did not notice that I wrote that I in fact know nothing about, but oh well, I imagine proehali.Kupil street chrome, generally satisfied, but have doubts about the authenticity, will not write much better lay out the photos, and I will describe a little of these pictures ... |
|
| Gorynych5 - Maniac Moscow 0:54 - 20 May 2012 1860 posts |
| |
| nagato0309 writes: xidemonix, maybe you did not read all my posts, or did not notice that I wrote that I in fact know nothing about, but oh well, I imagine proehali.Kupil street chrome, generally satisfied, but have doubts about the authenticity, will not write much better lay out the photos, and I will describe a little of these pictures ...
Guys do not quarrel. You, nagato0309, asked for a typical beginner question: I'm a sports coupe to quickly and more so that the potatoes with cottages carry on the muddy ruts. xidemonix gave you a typical old-timer is the answer: it does not happen. In this case, you are unlikely to want something to offend, so really does not happen very soon to practice tricks and you'll see for yourself. And certainly not just say thank you to those who tried to dissuade taking tricks to expensive models. |
|
| Gorynych5 - Maniac Moscow 1:07 - 20 May 2012 1860 posts |
| |
| Message Edit 1:09 - May 20, 2012 user Gorynych5
I'm a little sum up, if you're too lazy to use the search on the resource. Loop absolutely all models are the same, that is to say if you choose Armour-plates or blotches, the wear will be even more, plus you run the risk of hurt fingers (and even on the feet during training lighter than once fall to the floor on bare feet, fly in the cat, or in an aquarium for fishes). Age any trick lighters brief, about like a sports car for professional racing - two or three seasons and the motor burned out ... |
|
| nagato0309 - Member 1:30 - 20 May 2012 Posts 21 |
| |
| I have no one even thought to quarrel, I wanted to hear a clear and understandable answers. Xidemonix gave me to understand that the strength and tricks-incompatible veschi.Foto I did, and tried to put me to write that this is not the halyard fotografiya.Nu about Original I probably uveren.V box all paper, is what keeps the lighter something similar to barhat.Pod lighter zippo lighters new ads blu.A about lighters have a couple of questions ... When I loved the sound of the lighter, insert firmly sitting. pleased that the seller immediately when the question about zippo said they all clean America, lifetime warranty, if you break something lighter to carry with them a box and they are all free to send Moskvu.Tak here I turn to vpros about the quality ... First I interested in the hole in the loop should not be skvoznym.Ono I did not through, and within visible light shtyrek.Tak here this pin I have it on one side comes to the end of all tabs, and on the other hand can be seen that it is not until the end comes. On my "Chinese Zippe" this pin is fully in these petlyah.Tak here whether it should not be considered complete? Just a small movement of top caps, I have it left and right coming off of two millimeters (without the insert of course the same) whether .mozhno these tabs to pull, and how? Next question about insert.On me when opening-closing climbs a little, well ... a millimeter-poltora.Tak easily included when pressed, whether it is possible to do something that he could barely climbs even when efforts? of traces question about kolesiko.Shtyr that keeps it certainly is not through, but I read somewhere that the wheel should sit tight, and not a drop to move storony.Tak now I have a little wheel dvigaetsya.Tak same moves the hammer, which responsible for opening kryshki.Tak here whether the two parts move? liqueurs on wheels at an angle, not straight, whether they should be as Well on the case there seems to be all I would like to ask about shtampy.Shtampy to insert fully comply with the punches on originalov.No picture on the stamp where it says zippo made in USA after saying zippo not sign R, a simple point on, and it is not a bit you can see the letter R, a little higher on the label where it says use zippo, zippo clearly visible after letter R in kruzhochke.Tak same on the body, where traces of soldering two parts of the housing traces are not perfectly round, and I have often read that they should be perfectly kruglymi.U me they are slightly oval, quite slegka.Tak also stamped on the bottom of the housing around the letters F, well, month of release, there is a small, deep tsarapina.Vidno it damage to the plant, there would be questions about eomu, but this how-to stamp from scratch ... maybe because of the lighter cover? which itself scratched, I do not znayu.Esche felt pad to insert pretty deep in the insert, in my Chinese, it almost does not get out :). Well, that's all I wanted to ask, I'm sorry, that without pictures, but the site does not accept them for some reason to.Zhdu answers, dear users. |
|
| Gorynych5 - Maniac Moscow 10:52 - May 20, 2012 1860 posts |
| |
| About the backlash of all the above I hasten to reassure you that all is normal. About how and what tuck-decompress, so sit tight and wrote more than once, you need to make intelligent search query online. For when the old-timers in the 101y once asked the same question, even the most peace-loving user will be broken and overlaid Matyuk;-) About the stamp is not fully caught Che-like, I think that without photos do not understand. If you do not leave them to lay out the instructions, please send them to me in PM, and I them perevylozhite in this topic with the comments that you attach to them, we will understand that there is not))) |
|
| nagato0309 - Member 11:35 - May 20, 2012 Posts 21 |
| |
| Thanks, now I will try to send a photo in a personal, koneno they were not taken with an expensive camera, but you can make out. |
|
| nagato0309 - Member 11:53 - May 20, 2012 Posts 21 |
| |
| Message Edit 11:57 - May 20, 2012 user nagato0309
http://s019.radikal.ru/i603/12.....f2731b.jpg here it is a scratch near the letter F http://s019.radikal.ru/i603/12.....4e7de3.jpg principle here I was happy with everything, but you can be the comments ... http://s40.radikal.ru/i089/120.....826c4f.jpg and here it is seen that after the bottom inscription zippo not just R, and the point http://s008.radikal.ru/i303/12.....eea3c0.jpg a felt pad, and it is deep enough http://i072.radikal.ru/1205/d5.....5eb0b5.jpg and this wheel, and you can see that it does not sit tight and leaves little |
|