Post |
---|
| runningbus - Member 14:35 - 19 March 2012 Posts 39 |
| |
| Message Edit 14:39 - March 19, 2012 user runningbus
Welcome. Going as a gift on his 18th birthday to buy original quality lighter zippo. Such that served me for years, did not break and did not refuse. Now the questions. There is a shop Zebra. Many know him. There is a gifting, where spinning platform with a Zippo. In the same department, I bought myself a fake zipku wick and flints. Wick and silicon original. I was convinced (the wick is not damaged at all, silicon always give a lot of sparks) So tell me, where the original lighters sold in such platforms, or forgery is? I currently possess a fake Zippo, and I know all of its spaces. Yet in addition. In the original Zippe whether empty housing (without insert) in a closed form to move from side to side (the effect of cranky loops, when they have a gap, both the housing cover moving sideways)? |
|
| Gorynych5 - Maniac Moscow 14:49 - 19 March 2012 1860 posts |
| |
| Pro shop Zebra will not say, but in general all the shops with revolving racks sell fakes extremely rare, it is not worth the cost of the original forgery and lighters are quite comparable. About the play loop: it is quite a common thing for lighters last years of release (unfortunately) ... |
|
| Gorynych5 - Maniac Moscow 15:01 - 19 March 2012 1860 posts |
| |
| I probably will write a platitude, but learn how to be a section on forgeries, the dating on and off, armed with printouts or links if you have a smartphone or tablet with a high-quality resolution and forth to the store. Seller always allow povertet-examine the goods and take a decision. |
|
| Kuryan - Expert Tashkent 15:47 - 19 March 2012 479 posts |
| |
| Message Edit 15:50 - March 19, 2012 user Kuryan
I confirm that the seller always allow povertet goods))) When I recently went to buy a new lighter, (I wrote about this in his topic) then the seller got me all lighters from the counter, so I considered them, I opted for matching the release date of the insert and the housing at the same time check clearance (left-right) of the body without the insert. Unfortunately all zhigah have this play, I got more or less, play a small (about 1 mm in both directions) ...... |
|
| runningbus - Member 17:03 - 19 March 2012 Posts 39 |
| |
| And there are such characteristics as looseness wheel hanging flicking tongue liner is not fully soldered (divided into two parts, and closely tightening gap increases and the bolt to spin endlessly), rusting from the inside of the insert from gasoline oblazene schelkanya coating of the tongue? And by the way, interfere with this play? There at all hard to do? |
|
| evenk - Expert Moscow region 18:24 - 19 March 2012 391 posts |
| |
| runningbus writes: And there are such characteristics as looseness wheel hanging flicking tongue liner is not fully soldered (divided into two parts, and closely tightening gap increases and the bolt to spin endlessly), rusting from the inside of the insert from gasoline oblazene schelkanya coating of the tongue?
"Horror" you have something has been written, not seen on their ZIPPO niichego like, neither old nor novyh.Krepko everything is done fast ... |
|
| runningbus - Member 20:19 - 19 March 2012 Posts 39 |
| |
| evenk writes: runningbus writes: And there are such characteristics as looseness wheel hanging flicking tongue liner is not fully soldered (divided into two parts, and closely tightening gap increases and the bolt to spin endlessly), rusting from the inside of the insert from gasoline oblazene schelkanya coating of the tongue?
"Horror" you have something has been written, not seen on their ZIPPO niichego like, neither old nor novyh.Krepko everything is done fast ...
Pleases. It would be desirable to lighter memory and was very dolgorabotayuschey. I like something to look at her and thought, yes they say, do you remember so-and-so)) |
|
| Kuryan - Expert Tashkent 20:37 - 19 March 2012 479 posts |
| |
| runningbus writes: And there are such characteristics as looseness wheel hanging flicking tongue liner is not fully soldered (divided into two parts, and closely tightening gap increases and the bolt to spin endlessly), rusting from the inside of the insert from gasoline oblazene schelkanya coating of the tongue? And by the way, interfere with this play? There at all hard to do?
This is my description of some Chinese sh ...... forgive)))))) You can also add that the cover does not open and the lights from the fifty-fifth time))))) Much afraid chesslovo! ))) |
|
| Gorynych5 - Maniac Moscow 20:44 - 19 March 2012 1860 posts |
| |
| Brothers! Less fiction, more specifics. And zarugayus;-) |
|
| Kuryan - Expert Tashkent 20:46 - 19 March 2012 479 posts |
| |
|
| Val1730 - Expert 22:26 - 19 March 2012 158 posts |
| |
|
| alex - Member 22:41 - 19 March 2012 64 posts |
| |
| Val1730 original inserts are sometimes inserted into the left of the body (often in flip flops). so check the body necessarily. |
|
| Gorynych5 - Maniac Moscow 22:41 - 19 March 2012 1860 posts |
| |
| Perhaps add that icon R, in the original climbs onto the ledge-cheek, as in the above pictures, I've seen fakes have it on a flat surface. |
|
| Gorynych5 - Maniac Moscow 22:53 - 19 March 2012 1860 posts |
| |
| And so to the heap, forge Zippo, it's about how to forge a paper banknote of 10 rubles. Even the central bank refused to produce them, the paper comes out more expensive than his own denomination))) |
|
| Val1730 - Expert 23:19 - 19 March 2012 158 posts |
| |
| alex wrote: Val1730 original inserts are sometimes inserted into the left of the body (often in flip flops). so check the body necessarily.
Kind of like runningbus wants to buy a modern, rather than the Vietnam War :) |
|
| runningbus - Member 17:12 - 20 March 2012 Posts 39 |
| |
| Kuryan writes: runningbus writes: And there are such characteristics as looseness wheel hanging flicking tongue liner is not fully soldered (divided into two parts, and closely tightening gap increases and the bolt to spin endlessly), rusting from the inside of the insert from gasoline oblazene schelkanya coating of the tongue? And by the way, interfere with this play? There at all hard to do?
This is my description of some Chinese sh ...... forgive)))))) You can also add that the cover does not open and the lights from the fifty-fifth time))))) Much afraid chesslovo! )))
No, no, I nachigil its all original, it lights up the first time. But hang loop as g.vno. Her take on risuonk look, you start the top cover back and forth to drive here to get a piece of the insert, ie the gap when moving the top cover is even insert. Can you not understand what I'm saying, but in a broader sense it is clear that the Chinese lighter. But who is not hard to tell the characteristics of your lighter. Theirs-esteem and so on.
|
|
| Kuryan - Expert Tashkent 19:29 - 20 March 2012 479 posts |
| |
| Message Edit 19:31 - March 20, 2012 user Kuryan
Zippo dignity - this is what it is - Zippy! )))) Trouble-free, reliable, brand and so on ... what could be the merits, even if when it's asking me to light a cigarette and I take it, then start asking questions like - "Oh! This, or China? "))))) Characteristics there can not possibly be, its characteristics fit into one word, I think it is clear in what it is - "Zippy")))) There is nothing special and characterize except registration details and subtleties of a particular model ... her. Here, as never, where the whole meaning and characteristics fit in a single word)) Though I can something not well understood in the question about the characteristics, I do not know ...... |
|
| runningbus - Member 22:27 - 20 March 2012 Posts 39 |
| |
| Kuryan writes: Message Edit 19:31 - March 20, 2012 user Kuryan
Zippo dignity - this is what it is - Zippy! )))) Trouble-free, reliable, brand and so on ... what could be the merits, even if when it's asking me to light a cigarette and I take it, then start asking questions like - "Oh! This, or China? "))))) Characteristics there can not possibly be, its characteristics fit into one word, I think it is clear in what it is - "Zippy")))) There is nothing special and characterize except registration details and subtleties of a particular model ... her. Here, as never, where the whole meaning and characteristics fit in a single word)) Though I can something not well understood in the question about the characteristics, I do not know ......
Yes, almost written. But that's another answer to the question. Is it true that modern Zippo will last a lifetime? (I do not mean just a lifetime, but the meaning is clear that it is very very very long time) |
|
| Kuryan - Expert Tashkent 22:58 - 20 March 2012 479 posts |
| |
| Message Edit 11:37 - March 21, 2012 user Kuryan
My answer is not right, to give food for thought :)))) And you know how many years of life accommodates the human body? Other data exist, but what I've heard - it's about 250 years old, but it is in perfect catch, and how we the people live? )))) So if you throw a cigarette lighter from a plane and drop it 10 times a day on concrete, how much it will serve you no one will answer. And there are people with whom she works more than a dozen years. I think the meaning of the answer is clear, too, right? :)))) One of my long 12 years, and I think that she still outlive me .......... But I have visited Chinese hoo much still one lying around at home and one at work. |
|
| runningbus - Member 12:29 - 21 March 2012 Posts 39 |
| |
| Kuryan writes: Message Edit 11:37 - March 21, 2012 user Kuryan
My answer is not right, to give food for thought :)))) And you know how many years of life accommodates the human body? Other data exist, but what I've heard - it's about 250 years old, but it is in perfect catch, and how we the people live? )))) So if you throw a cigarette lighter from a plane and drop it 10 times a day on concrete, how much it will serve you no one will answer. And there are people with whom she works more than a dozen years. I think the meaning of the answer is clear, too, right? :)))) One of my long 12 years, and I think that she still outlive me .......... But I have visited Chinese hoo much still one lying around at home and one at work.
Well, then it's understandable. Break there basically nothing. But in China there. There piston for the wick is too narrow for the wick. Had to loosen it, and he dismounting and an end to all the lighter. You can not remove the topic when Acquiring Zippo, accomplish your goal here and will post pictures of the genuine or not. |
|
| Kuryan - Expert Tashkent 13:38 - 21 March 2012 479 posts |
| |
| Well delete probably no one will, though I do not know about this, but the pictures will be interesting to look) Only good quality, it is desirable ... |
|
| Gorynych5 - Maniac Moscow 17:38 - 21 March 2012 1860 posts |
| |
| Agreed, while I will not delete. Looking forward to photos and other impressions. Incidentally, I delete the "left" and "cloned" theme, not because I do nothing more than to sit and monitor the site: "I Chёby remove this today?", And at the request of visitors who complain that shit is impossible to find ))) |
|
| runningbus - Member 14:04 - 26 March 2012 Posts 39 |
| |
| Bought. Photo later. Bought a replica. Everything in it is large enough like authentic. But worrying that it is the inscription on the bottom of PAT. 2032695 and the inscription ZIPPO without a spark. Lighter, 2011. |
|
| Kuryan - Expert Tashkent 14:08 - 26 March 2012 479 posts |
| |
| This Replica same! )))) See here: http://zippocollector.ru/zippo-dating/ Specifically, here's this picture:  |
|
| runningbus - Member 14:12 - 26 March 2012 Posts 39 |
| |
| Kuryan writes: This Replica same! )))) See here: http://zippocollector.ru/zippo-dating/ Specifically, here's this picture: 
Yes, yes it is a replica)) All in it perfectly and smoothly. 4 loops. And bedplate as in your photo but instead of A and J stands instead of 01 worth 11 What does this mean I already know.)) That is such on the original? I chose it in a zebra in the gift department, and there I was told that they are 100% authentic, has seen many famous models, but I dreamed about replica)) Very happy)) Photo will be in the evening.) |
|
| Kuryan - Expert Tashkent 14:20 - 26 March 2012 479 posts |
| |
| Now I myself want Rejoinder))) I hope someday I will take ...... I think that you have a genuine, waiting for the photo) Congratulations on your purchase! |
|
| runningbus - Member 14:23 - 26 March 2012 Posts 39 |
| |
| Kuryan writes: Now I myself want Rejoinder))) I hope someday I will take ...... I think that you have a genuine, waiting for the photo) Congratulations on your purchase!
Thank you) Also I hope that the true even sure. The store their brains wiped and took out how many chose inserts and shaped as letters are reconciled) The insert glad the wheel studs. A pass-through on the wheel and the other on the cam whole. |
|
| runningbus - Member 20:20 - 26 March 2012 Posts 39 |
| |
|
| runningbus - Member 20:24 - 26 March 2012 Posts 39 |
| |
| Photos may not be very good quality. I also want to add one. Very upset that on the bottom there is no comma after BRADFORD. This necessarily means that the fake Zippo? It works perfectly, hinges steel, body can be seen that the nickel-click is great, ignited the first time. Thick, seen that thing. |
|
| Gorynych5 - Maniac Moscow 20:31 - 26 March 2012 1860 posts |
| |
| Do not worry! Replica forge neudobnyak too. For the original insert (fuck-through riveting even the Zippo did not want to). |
|