ZippoCollector.ru

Goji paste

Message edited 15:00 - July 9, 2012 user Atila

It's brass, properly clean up a small skin and paste zapolirovat goyim. I have a brass replica of 1941, which eventually covered with small black dots and sometimes darkened, as it did, now like new.

The steel parts in order. The only problem is the outside of the brass. Another advised to clean the toothpaste. It seems that it is too small abrasive ...

And it should die goyim paste cheaper than a tube of toothpaste))))

Atila wrote:

Yes, what toothpaste, lighter murdered, judging by the photos ... Then rub the paste Goi week is necessary. So first a soft cloth nulevkoy good walk, and then polish the goyim.

But I'm not agree with you ... She is oxidized, and do not scratch, why rubbing her nulevkoy? And in general on polishing cloth not everyone has the patience. Disfigure man coverage so throw ....

well, or buy in the store with a pair of automotive paint brushes leaves skin 1000-1500, half an hour to remove the minimum layer of gonorrhea and then a piece of felt boot in hand, rub the paste behalf of the State Optical Institute and herachit another half hour.

I'm on the windscreen when the old and the inner surface of the cover against each other flayed to the disgrace, so that's restored. was as new and kept for a long time.

no luck so

I stick to a simple opinion. if you do not know what you undertake / are not able / not ready / sumlevayus in different places of your mind ... and take neher. Well, people ask tricky questions. and so it is clear that, as is done - and the sex is hot and memorable.

and technically - correct shkurochkoy polishing, well, or for debugging, as it is to say the right and then the GOI or diamond paste. most importantly - felt boots. this is important.

if you just zapolirovat over - get props for a German film. and the film is not about the war ...

PS: snot waste is not required. Wash with water ... and raced

voooot! ... Poper constructive! ...

but that does not smogete, will not work ...

wings ... legs .... the main thing - the tail!

:-D

Gorynych5 writes:

Message edited 10:53 - July 10, 2012 Members Gorynych5

---

Constructive talking about? Can be complicated))) Galvanic bath! Vladimir aka kypexin wrote that uses the. But the bath is expensive and buying it for cleaning one or two lighter stupid. What to do? Go to the repair shop cell phones. There are used to clean the boards after the fall device in water, beer or Coke. Arrange a "misuse" of equipment used for the polite and sociable person will not be difficult ;-)

No galvanic current, ultrasound and by the way :) I was dead device and a half years of use.

kypexin writes:

And by the way of oxides ultrasound little help - he cleans the dirt and soot. And of course we need some oxide chemistry.

Sorry, Volodya, was wrong with the device that was you. But they just electroplating of oxides, because my advice to the campaign in SC repair gamers are not devoid of meaning ;-)

risotto writes:

Removed the plaque with chalk. Made a mush, and walked with a rag on the lighter. It turned out well - shines like new :). Although, metal oxides were slightly visible from the cavern. If the surface is completely recover, most likely without my best and the GOI can not do. But lighter combat, and does not exhibit the collection. 'll Leave that. Thank you all for your advice!

I too did not get rid of the "signs of the time" finally, the very name of the vintage model simply requires it to look vintage)))) Well, and advice on mechanical or electro-chemical attack distribute a "pile up" ;-)

Normal a "replikovy" stamped with the patent number, roman numeral indicates that your legacy 1991 edition.

chaa174 writes:

with cavities do not even twitching. so you will have to remove the layer of metal lighter that would end in the process. and Point - a hell of a crap happens.

Gorynych5 ... if you really went tops women's sexual and raced over bumps, what prevents us boars in the plating bath to take yes nickel patient tries? ;-)

oops ... ep ... thinking!

so ... guys, I've got this ... well ... at which that thing ... yeah ... maxim mother!

What if slightly bluish create an alternative solution from Zippo? do not armor on the principle of Gandon - thicker walls, but on the principle of engineering - a thicker layer of nickel?

but me troechniki chemistry EFTA to calculate a solution and stir up?

Personally, I hindered by a lack baths and a little bit of knowledge in chemistry. But the "Japanese" for sure a similar way, and reported after the application of any engravings-ukrashalok. I think the process is not very complicated, because one is able to mine is not the most gifted buddy passes ptushnuyu practice at the enterprise, nickel, at my request submachine gun cartridge. It turns out not the most difficult task. And that's too thick in doubt .. Will it hold? Chinese counterfeits of steel chrome easily otkolupyvalsya nails like paint ... You've got to with your chemists troechniku ​​advice ;-)

Slav, is also an option, but .. In garages equipment for large detalyushek. If the restoration of the massive bumper GAZ-13 Chaika or American "ship" small nodules are not visible, then for sure get a little lighter uneven and ugly. Of course, much depends on the skill of the performer. The bottom will probably be zasrali so that the authenticity of lighters prove to be problematic ... And what about the inetifikatsiey model? For instance ass in the regular Solid Brass flat and depressed nickel-plated stamp .. In general, a lot of controversial issues. And comrade chaa174 raised an interesting question, and if decides to experiment with pleasure to look at the result. Moreover, the weighted before and after test operation.